MPV LX 2WD V6-3.0L SOHC (1998)
Camshaft: Specifications
CAMSHAFT RUNOUT .............................................................................................................................................. 0.03 mm {0.0012 inch} maximum
NOTE: Set the front and rear journals on V-blocks. Measure the camshaft runout. Replace if necessary.
CAM LOBE HEIGHT
NOTE: Measure the cam lobe height at the two points
Height:
IN .......................................................................................................................................................................................
41.054 mm {1.6163 inch}
EX ......................................................................................................................................................................................
41.293 mm {1.6257 inch}
Minimum:
IN .......................................................................................................................................................................................
40.854 mm {1.6084 inch}
EX .....................................................................................................................................................................................
41.093 mm {1.6178 inch}
CAMSHAFT JOURNAL DIAMETERS
NOTE: Measure the journal diameters in X and Y directions at the two points (A and B) shown.
Diameter:
No. 1 and No. 4 ......................................................................................................................................
48.923 - 48.938 mm {1.9261 - 1.9266 inch}
No. 2 and No. 3 ......................................................................................................................................
48.915 - 48.935 mm {1.9258 - 1.9265 inch}
Out-of-round ........................................................................................................................................................
0.03 mm {0.0012 inch} maximum
