MPV LX 2WD V6-3.0L SOHC (1998)
B.
Set the HVAC controls as follows:
^
RECIRCULATE
^
FULL HEAT
^
FAN HIGH
^
A/C OFF
^
AIRFLOW (FACE)
C.
Open one window approximately one half inch.
D.
Let the engine run for 15 minutes.
2.
Remove the glove box by:
A.
Pushing the top stops inward (plastic will flex).
B.
At the right side hinge, lift the clip out of its seat.
C.
Pull the left side axle pin out towards the right side and remove the glove box.
3.
Shake a bottle of the Mazda Air Cooling Coil Coating well and attach it to applicator, then connect the applicator to compressed shop air.