mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

ABOUT US
Engine - No Start/Rough Idle After Timing Bel R & R|Page 558 > < Engine - No Start/Rough Idle After Timing Bel R & R|Page 556

MPV LX 2WD V6-3.0L SOHC (1998)

Page 1
background image

Timing Belt: Service and Repair

REMOVAL / INSTALLATION 

1. Disconnect the negative battery cable.
2. Drain the engine coolant.
3. Remove in the order indicated in the table.
4. Install in the reverse order or removal indicated in the table.
5. Fill the radiator and coolant reservoir with the specified amount and type of engine coolant.
6. Connect the negative battery cable.
7. Start the engine and

1. Check the engine oil and engine coolant leakage.
2. Check the ignition timing and idle speed. 

Crankshaft Pulley Removal Note 

Engine - No Start/Rough Idle After Timing Bel R & R|Page 558 > < Engine - No Start/Rough Idle After Timing Bel R & R|Page 556