MPV LX 2WD V6-3.0L SOHC (1998)
3. Position the timing belt in the original direction, and hang it on each pulley in the order shown.
4. Install the upper idler pulley.
Tightening torque:
38 - 51 Nm {3.8 - 5.3 kgf/m, 28 - 38 ft. lbs.}
5. Turn the crankshaft clockwise twice and align the timing marks.
6. Check that the timing marks are correctly aligned. If not, repeat steps 2 - 5.
7. Remove the pin from the auto tensioner.
8. Turn the crankshaft clockwise twice and align the timing marks.
9. Reconfirm that the timing marks are correctly aligned.
10. Remove the crankshaft pulley lock bolt.
Timing Belt Cover Installation Note
1. Install the timing belt covers along with new gaskets.
