MPV LX 2WD V6-3.0L SOHC (1998)
Evaporative Emission Control Canister: Testing and Inspection
Related Diagnostic Procedures
Canister Drain Cut Valve (CDCV) Inspection
1. Remove the CDCV.
2. Inspect airflow between ports of the solenoid valve.
3. If not as specified, replace the CDCV.
Check Valve (Two-Way) Inspection
1. Remove the check valve.
2. Blow air into port B and verify that air smoothly flows from port C.
3. Blow air into port C and verity that air smoothly flows from port A.
4. If not as specified, replace the check valve.