MPV LX 2WD V6-3.0L SOHC (1998)
Crankshaft Position Sensor: Testing and Inspection
Resistance Test
1. Disconnect the crankshaft position sensor connector.
2. Measure the resistance between terminals A and B by using an ohmmeter.
Specification: 950 - 1250 Ohms [20°C { 68°F }]
3. If not as specified, replace the crankshaft position sensor.
Air Gap Test
1. Measure the air gap between crankshaft pulley and crankshaft position sensor by using a feeler gauge.
Specification 0.5-1.5 mm (0.020-0.059 in)
2. If not as specified, replace the crankshaft pulley or the crankshaft position sensor.