MPV LX 2WD V6-3.0L SOHC (1998)
Fuel Pressure: Testing and Inspection
Fuel Pressure Test
1. Disconnect the negative battery cable.
2. Install the fuel pressure gauge between the fuel filter and the
3. Fuel distributor.(lnstall clamps as shown.) See: Fuel Filter/Fuel Pressure Release
4. Connect the negative battery cable.
CAUTION:
Connecting the wrong data link connector terminals may possibly cause a malfunction. Carefully connect the specified terminals only.
5. Connect the data link connector terminals F/P and GND with a jumper wire.
6. Turn the ignition switch to ON.
7. Measure the fuel line pressure.
Fuel line pressure
265-313 kPa {2.7-3.2 kgf/sq.cm,39-45 psi}