MPV LX 2WD V6-3.0L SOHC (1998)
Air Bag Control Module: Service Precautions
^
installing a connected SAS unit is dangerous. Movement generated during Installation can cause the crash sensor inside the unit to send an
electrical signal to the air bag modules. This will deploy the air bags, which may result in serious injury. Therefore, before connecting the SAS
unit, firmly mount the unit to the vehicle.
^
Disconnecting the SAS unit connector or removing the SAS unit with the ignition switch at ON can cause the air bags to deploy, which may
seriously injure you. Before disconnecting the SAS unit connector or removing the SAS unit, perform the general procedures.