MPV LX 2WD V6-3.0L SOHC (1998)
Seat Belt: Service and Repair
Front Seat Belt
CAUTION:
^
The ELR has a spring that will unwind if the retractor's cover is removed. The spring cannot be rewound by hand. If this occurs, the ELR will not
work properly. Therefore, do not disassemble the retractor.
1. Remove the front scuff plate.
2. Remove the rear scuff plate.
3. Remove the B-pillar lower trim.
4. Remove in the order indicated in the table.
5. Install in the reverse order of removal.
6. Install the B-pillar lower trim.
7. Install the rear scuff plate.
8. Install the front scuff plate.
