MPV LX 2WD V6-3.0L SOHC (1998)
Seat Belt: Service and Repair
Rear No. 2 Seat Belt
REMOVAL AND INSTALLATION
CAUTION:
^
The ELR has a spring that will unwind If the retractor's cover is removed. The spring cannot be rewound by hand. If this occurs, the ELR will not
work properly. Therefore, do not disassemble the retractor.
1. Remove the mat set end plate.
2. Remove the rear side trim.
3. Remove in the order indicated in the table.
4. Install in the reverse order of removal.
5. Install the rear side trim.
6. install the mat set end plate.