MPV LX 2WD V6-3.0L SOHC (1998)
^
Apply battery positive voltage to terminal S and ground the body, and verify that the pinion is pulled out.
^
Measure the pinion gap while the pinion is pulled out.
Specification
0.5-2.0 mm (0.02-0.08 in)
^
If not within the specification, adjust with an adjustment washer (drive housing front cover-magnetic switch).
Return test
1. Disconnect the motor wire from terminal M, and then connect the battery power to terminal M and ground the body.
2. Pull out the drive pinion by using a screwdriver. Verify that the drive pinion returns to its original position when released.