MPV LX 2WD V6-3.0L SOHC (1998)
Tightening torque: 50 - 58 Nm (37 - 43 ft. lbs.).
Tie Rod Assembly Note (21)
1. Secure the rack in a vise.
2. Install the tie rod onto the rack.
Tightening torque: 118 - 137 Nm (87 - 101 ft. lbs.).
Boot Assembly Note (22)
1. Apply grease to the inner surface of the small end of the boot.
2. Install the boot. Wrap a new boot wire around the large end of the boot two times and then twist it 4 to 4.5 times. Bend the twisted part toward the
mounting bracket.
3. Install the boot clamp on the small end of the boot.
Tie-rod End Boot Assembly Note (25)
1. Wipe away the grease on the ball joint.
2. Put a small amount of grease (lithium-based) into the new boot and set it onto the tie-rod end.
3. Press the boot onto the tie-rod end by using the SST and a press.
4. Wipe away any grease expelled from the dust boot.
Tie-rod End Assembly Note (26)
