MPV LX 2WD V6-3.0L SOHC (1998)
Shift Cable: Adjustments
SELECTOR CABLE ADJUSTMENT
1. Shift the selector lever to P position.
2. Loosen nut A shown in the figure.
3. Position the selector cable so that there is no load in the direction of the arrows, and tighten the nut.
Tightening torque
16-22 Nm ( 1.6-2.3 kgf-m , 12-16 ft. lbs.)
4. Shift the selector lever from P position to 1 range, and make sure that there is no interference with other components in that area.
