MPV LX 2WD V6-3.0L SOHC (1998)
6. Use a brush to apply primer to the bonding area of the glass and the body. Allow it to dry for approximately 30 minutes.
7. Apply an 11 mm {0.43 in} high bead of sealant around the circumference of the glass as shown. Keep the bead of sealant smooth and even,
reshaping it where necessary by using a spatula.
8. Align the glass via the pins and install it onto the body.
9. Press firmly inward on the glass to compress the sealant.
10. Use a scraper to smooth away any sealant that oozes out. Add more sealant to any points of poor contact.
11. To prevent the glass from being pushed out by air pressure if a door is closed, open all of the windows until the sealant has hardened.
Hardening time of sealant
12. Check for water leaks. If a leak is found, wipe the water off well and reinstall the rear window glass.
13. Install the rear wiper arm.
