MX-3 L4-1597cc 1.6L (1992)
Seat Cushion: All Technical Service Bulletins
Seat Trim, Rear - Cushion Separates at the Seams
Bulletin No.: 002/94
Issued: 1/13/94
Revised
Category
S
Applicable Model/s
1992-93 MX-3
Subject:
REAR SEAT CUSHION SEPARATES AT SEAMS
This bulletin was originally issued 12/17/93 as Cat. S, No. 053/93. Replace that original bulletin with this copy.
APPLICABLE MODELS/VINS
MX-3
1992 - Vehicles with a VIN of JM1EC43**N0100001 through JM1EC43**N0199999
1993 - Vehicles with a VIN of JM1EC43**P0200001 through JM1EC43**P0236436
NOTE:
The asterisk (*) in the VIN range can be any number (0 through 9) or "X".
DESCRIPTION
Some vehicles may have the rear seat trim separating at the seam as shown. The material used to manufacture the rear seat trim has been changed to
prevent this problem. Customers that have this problem should have the rear seat trim removed and the modified part installed.
REPAIR PROCEDURE
Refer to the instructions in section 5 of the workshop manual to replace the rear seat trim.
PARTS INFORMATION
WARRANTY INFORMATION
(Covered For 36 Months/50,000 Miles)
Warranty Type:
A
Customer Comment Code:
87
Damage Code:
9E
