mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

A/C - Poor Performance|Page 4066 > < A/C - Poor Performance|Page 4060
Page 1
background image

Condenser Fan: Customer Interest
A/C - Poor Performance

Bulletin No.: 017/92
Issued: 10/9/92
Revised: 10/23/92

Category 

U

Applicable Model/s 
1992 MX-3 
(1.6L, 4 Cyl.)

Subject:
POOR A/C PERFORMANCE

*

The revised section is indicated by an asterisk. Please replace the original bulletin with this revised bulletin.

DESCRIPTION

Some vehicles may experience poor A/C performance. The cause is insufficient air flow across the A/C condenser.

A modified sub-harness has been developed to allow both the A/C and engine cooling fans to operate simultaneously and improve condenser air flow.

NOTE:
Prior to installing this sub-harness, verify the A/C system has the correct amount of refrigerant charge and check for any other conditions which may
contribute to poor A/C performance - refrigerant leakage or poor A/C connections.

REPAIR PROCEDURE

1.

Disconnect the battery negative cable.

2.

Obtain 1 new sub-harness (EAY1 61 54X) and 9 tie-wraps (NA02 61 435). Examine the couplers at each end of the harness. One end of the
harness has two 6-pin connectors each with 4 terminals. The other end of the harness also has two 6-pin connectors; one with 5 terminals, the other
with 6 terminals.

A/C - Poor Performance|Page 4066 > < A/C - Poor Performance|Page 4060