MX-3 L4-1597cc 1.6L (1992)
4.
Connect sensor harness terminals with a jumper wire as shown and check that condenser fan stops for approximately 10 seconds.
NOTE: Compressor clutch and condenser fan operate in unison. "ATX" connector: automatic transmission vehicle. "MTX" connector: manual
transmission vehicle.
5.
If system does not operate as specified, check wiring, connections and individual components.
6.
Check ECU output voltages for A/C relay, blower motor switch and A/C switch. If not correct and no other problem is detected, suspect a defective
ECU.