MX-3 L4-1597cc 1.6L (1992)
Window Track: Customer Interest
Glass Run Channel - Wrinkles
Bulletin No.: 004/94
Issued: 1/17/94
Revised
Category
S
Applicable Model/s
1992-93 MX-3
Subject:
GLASS RUN CHANNEL WRINKLES
APPLICABLE MODELS/VINS
MX-3
1992 - Vehicles with a VIN of JM1EC43**N0100001 through JM1EC43**N0199999
1993 - Vehicles with a VIN of JM1EC43**P0200001 through JM1EC43**P0238685
NOTE:
The asterisk (*) in the VIN range can be any number (0 through 9) or "X".
DESCRIPTION
Frequent opening and closing of the driver or passenger windows may cause the glass run channel to slide up the sash and gather at the top rear corner of
the window. This results wrinkles or sagging in that area (see illustration below). To prevent this condition, the glass run channel has been attached to the
window sash with butyl tape. If this occurs, follow the procedures in this bulletin to repair the glass run channel.
REPAIR PROCEDURE
1.
Remove the glass run channel.
2.
Apply butyl tape to areas (A to B) as shown.
3.
Install glass run channel.
NOTE:
If the glass run channel is broken, Install a new part using butyl tape as shown.