MX-5 Miata L4-1.8L DOHC (1996)
5.
Position the new insulator pad in place of the removed padding. Make sure that the old and new padding do not overlap.
Note
^
It is not necessary to use adhesive when installing the new padding. Padding will not move out of position.
6.
Reinstall the carpet, scuff plates and front side trim panels.
7.
Verify repair.
PART(S) INFORMATION
WARRANTY INFORMATION
Note
This information applies to verified customer complaints on vehicles covered under normal warranty.
Warranty Type
A
Symptom Code
89
Damage Code
9E
Part Number Main Cause
See PART(S) INFORMATION
Quantity
1
Operation Number / Labor Hours
XX994XR1 (one side) / 0.3
XX994XR2 (both sides) / 0.5