MX-5 Miata L4-1.8L DOHC (1996)
Lifter / Lash Adjuster: Service and Repair
Legend
1. Timing belt
2. Crank angle sensor
3. Camshaft pulley
4. Camshaft
5. Hydraulic Lash Adjuster (HLA)
HLA
Removal / Installation
Caution
^
Obtain the code number and deactivate the audio anti-theft system before disconnecting the battery.
^
Position the hose clamp in the original location on the hose, and squeeze the clamp lightly with large pliers to ensure a good fit.
1. Disconnect the negative battery cable.
2. Drain the engine coolant.
3. Remove in the order shown in the image, referring to Removal Note.
4. Install in the reverse order of removal, referring to Installation Note.
