MX-5 Miata L4-1.8L DOHC (1996)
Removal Note
Hydraulic Lash Adjuster (HLA)
Caution
^
The HLA must be reinstalled in the same positions from which they were removed. If they are not, it can cause premature and uneven
wear.
Note
^
Mark the HLA to show their original positions.
1. Remove the HLA from the cylinder head.
2. Store the HLA upside down in an oil filled container.
Installation Note
HLA
1. Apply clean engine oil to the friction surfaces.
2. If the HLA are being reused, install them in the position from which they were removed.
3. Verify that the HLA move smoothly in their bores.
