MX-5 Miata L4-1.8L DOHC (1996)
5. Install the cylinder head cover.
6. Install the PCV valve.
7. Install the ignition coil and high-tension leads and sparkplugs.
8. Install the pulley lock bolt and pulley boss.
Hold the crankshaft by using the SST 49 D011 102 and tighten the pulley lock bolt.
Tightening torque: 157 - 166 N.m (116 - 122 ft.lbf)
9. Install the crankshaft pulley plate and crankshaft pulley.
10. Install the water pump pulley.
11. Install the generator drive belt.
12. Install the P/S and/or A/C drive belt.
13. Install the water hose (connected to thermostat housing).
14. Install the upper radiator hose.
15. Install the air intake pipe.
16. Install the splash shield.
17. Reconnect the negative battery cable.
18. Fill the radiator with the specified amount and type of engine coolant.
19. Start the engine and
(1) Check the engine coolant leakage.
(2) Check the ignition timing and idle speed.
(3) Check the operation of the emission control system.
20. Recheck the engine coolant level.
