MX-5 Miata L4-1.8L DOHC (1996)
Crankshaft Position Sensor: Service and Repair
REPLACEMENT
-
Remove the undercover.
-
Remove the crankshaft position sensor.
-
Install in the reverse order of removal.
Tightening torque: 7.9 - 10.7 Nm (70 - 95.4 in.lbs.)
AIR GAP
-
Measure the air gap between the crankshaft pulley and the crankshaft position sensor by using a feeler gauge.
Specification: 0.5 - 1.5 mm (0.020 - 0.059 in.)
-
If not as specified, replace the crankshaft pulley or the crankshaft position sensor.
