MX-5 Miata L4-1.8L DOHC (1996)
Engine Control Module: Service and Repair
REMOVAL/INSTALLATION
-
Remove the negative battery cable.
-
Remove in the order shown in the figure.
-
Install in the reverse order of removal.
1. Engine Control Module (ECM) connector
2. ECM
INSPECTION
CAUTION: the ECM terminal voltages vary with change in measuring conditions and vehicle conditions. Always carry out a total inspection of
the input systems, output systems, and ECM to determine the cause of trouble. Otherwise, a wrong diagnosis will be made.
-
Disconnect the negative battery cable.
-
Remove the ECM.
-
Disconnect the ECM connector.
-
Connect the SST (Harness Adapter) to the ECM connector.