MX-5 Miata L4-1.8L DOHC (1996)
Camshaft Position Sensor: Service and Repair
CAMSHAFT POSITION SENSOR REPLACEMENT
-
Remove the ignition coil.
-
Remove camshaft position sensor.
-
Install in reverse order.
-
Start the engine and adjust the ignition timing.
Timing: 10°±1° BTDC
-
Tighten the camshaft position sensor lock bolt to the specified torque.
Torque: 19 - 26 Nm (14 - 18 ft.lbs.).
