MX-5 Miata L4-1.8L DOHC (1996)
Transmission Temperature Sensor/Switch: Testing and Inspection
-
Refer to "Replacement" for removal of the transmission fluid temperature sensor.
-
Place the transmission fluid temperature sensor in ATF with a thermometer as shown, and heat the ATF gradually.
-
Measure resistance between the terminals of the transmission fluid temperature sensor.
-
If not correct, replace the transmission fluid temperature sensor.
-
Refer to "Replacement" for installation of the transmission fluid temperature sensor.
REPLACEMENT
-
Disconnect the negative battery cable.
-
On level ground, jack up the vehicle and support it evenly on safety stands.
-
Disconnect the transmission fluid temperature sensor connector.
-
Remove the transmission fluid temperature sensor.
-
Install the new transmission fluid temperature sensor.
Tightening torque: 7.9 - 10.7 Nm (70 - 95.4 in. lbs.)
-
Connect the transmission fluid temperature sensor connector.
-
Connect the negative battery cable.
