mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Air Bag Control Module > < Driver Side|Page 3900
Page 1
background image

Air Bag: Service and Repair
Passenger Side

1. Ensure battery ground cable is disconnected.
2. On MX-3 models, remove right front side trim.
3. On 929 models, remove front and rear console assemblies, Passenger's side undercover, lower panel and side panel.
4. Remove glove compartment and instrument panel undercover, then remove bolts securing module to instrument panel support.
5. Disconnect module electrical connectors, detach module support rope and lift module out of position.
6. Reverse procedure to install. Tighten fasteners to specifications.

Air Bag Control Module > < Driver Side|Page 3900