MX-5 Miata L4-1.8L DOHC (1996)
5. Follow the troubleshooting flowchart to verify that the air bag system is operating normally.
Installation Note:
Tighten the nuts in the order shown in the figure.
Tightening torque:
6.87-9.80 N.m (70 - 100 kgf.cm, 60.8 - 86.7 in.lbf)
SAS unit and bracket
1. If the bracket mounting area is damaged, repair the area to its original shape.
2. Position the SAS unit and bracket with the arrow on the SAS unit facing toward the front of vehicle. Install them then tighten the bolts and nuts to
the specified torque.
After Servicing
1. Connect the negative battery cable.
