MX-5 Miata L4-1.8L DOHC (1996)
Impact Sensor: Service and Repair
D-Sensor
Center
1. Ensure battery ground cable is disconnected.
2. Remove washer tank, then disconnect D-sensor connectors.
3. Remove sensor cover, clips, bolts and D sensor.
4. Reverse procedure to install. Tighten bolts to specifications.
Right and Left
1. Ensure battery ground cable is disconnected.
2. Disconnect D-sensor connectors, then remove undercover.
3. Remove clips, bolts and D sensor.
4. Reverse procedure to install, noting the following:
a. Position sensor with arrow towards front of vehicle.
b. Tighten attaching bolts to specifications.
