MX-5 Miata L4-1.8L DOHC (1996)
Transmission Mode Switch: Testing and Inspection
INSPECTION
Inspection Of Operation
-
Turn the ignition switch from OFF to ON.
-
Verify that the HOLD indicator light is not illuminated. Depress the HOLD switch and verify that the HOLD indicator light illuminates.
-
If not as specified, check the terminal voltage of the HOLD switch.
Inspection Of Voltage
-
Remove the front console.
-
Turn the ignition switch to ON.
-
Measure voltage at the HOLD switch connector.
-
If not as specified, check the continuity of the HOLD switch.
Inspection Of Continuity
-
Disconnect the negative battery cable.
-
Disconnect the HOLD switch connector.
-
Check continuity of the switch.