MX-5 Miata L4-1.8L DOHC (1996)
Transmission Speed Sensor: Service and Repair
REPLACEMENT
-
Disconnect the negative battery cable.
-
On level ground, jack up the vehicle and support it evenly on safety stands.
-
Disconnect the input/turbine speed sensor connector.
-
Remove the input/turbine speed sensor.
-
Install the new input/turbine speed sensor.
Tightening torque: 7.9 - 10.7 Nm (70 - 95.4 in. lbs.)
-
Connect the input/turbine speed sensor connector.
-
Connect the negative battery cable.