MX-5 Miata L4-1.8L DOHC (1996)
Transmission Position Switch/Sensor: Testing and Inspection
Automatic Transmission
INSPECTION
Inspection Of Operation
-
Verify that the starter operates only with the ignition switch at the START position and the selector lever in P and N position.
-
Verify that the back-up lights illuminate when shifted to R position with the ignition switch in the ON position.
-
Verify that the positions of the selector lever and the selector indicator light of the instrument cluster are aligned.
-
Check the Transmission range switch if not as specified.
Continuity
-
On level ground, jack up the vehicle and support it evenly on safety stands.
-
Disconnect the selector lever from the manual shaft.
-
Disconnect the transmission range switch connector.
-
Check continuity of the terminals.
-
If not correct, adjust the transmission range switch.
-
If correct, check or adjust the selector lever.
