mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Wiper Motor - Inoperative/Circuit Breaker Operation|Page 4811 > < Wiper Motor - Inoperative/Circuit Breaker Operation
Page 2
background image

3.

To prevent wiper motor binding:
^

when wiper blades become stuck to the windshield due to freezing, heavy snow build-up or nonuse for long period, follow the procedures
described.

CAUTION

Never operate the wipers when the windshield is dry. Squirt washer fluid on the glass before using the wipers to clean the windshield.

Service Managers and Service Advisors should relay the following to customers with this concern.

CUSTOMER NOTE:

^

If the circuit breaker opens and stops operation of the wiper motor, operation will resume once the circuit resets itself (approx. 5 minutes).

^

If while the circuit breaker is open, the wiper switch is turned "OFF", the wiper will automatically move to the "PARK" position once the circuit
breaker resets. 

If the wiper motor stops while the vehicle is in motion:

^

Carefully guide the vehicle off the road and stop. Turn the wiper switch "OFF".

^

Wait approximately 5 minutes then turn the wiper switch "ON" to verify wiper operation. If the wipers operate, the wiper motor is functioning
correctly (circuit breaker opened momentarily).

Technician's Note

If the wiper motor does not operate, check the wiper motor circuit (Refer to Workshop Manual or specific model) and replace wiper motor if
necessary.

Disclaimer

Wiper Motor - Inoperative/Circuit Breaker Operation|Page 4811 > < Wiper Motor - Inoperative/Circuit Breaker Operation