mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Catalytic Converter - Rattling Noise|Page 2171 > < Water Pump|Diagrams|Page 2161
Page 1
background image

Three-Way Catalytic Converter: Customer Interest
Catalytic Converter - Rattling Noise

Bulletin No.: 008/93
Issued: 5/15/93
Revised: 6/16/93

Category

F

Applicable Model/s
1990-93 MX-5

Subject:
RATTLING NOISE FROM CATALYST

The revised portion of this bulletin is indicated by an asterisk (*) Please replace the original bulletin with this revised copy.

APPLICABLE MODEL/VINS *

MX-5 VINS

1990 Vehicles with a VIN of JM1NA****L0100001 through JM1NA****L0999999

1991 - Vehicles with a VIN of JM1NA****M0200001 through JM1NA****M0999999

1992 - Vehicles with a VIN of JM1NA****N0300001 through JM1NA****N0999999

1993 - Vehicles with a VIN of JM1NA****P0400001 through JM1NA****P0416222

DESCRIPTION

A rattling noise may be heard from under the vehicle. This may be caused by a loose catalyst insulator. Follow the repair procedures in this bulletin to
correct this condition.

REPAIR PROCEDURES

1.

Lift the crimped edge of the insulator with a chisel.

NOTE:

Do not raise the entire edge of the insulator at one time. Work in sections (complete steps 1 through 3 of this procedure for each section).

Catalytic Converter - Rattling Noise|Page 2171 > < Water Pump|Diagrams|Page 2161