MX-5 Miata L4-1597cc 1.6L DOHC (1992)
Air Bag(s) Arming and Disarming: Service and Repair
Before performing any repair procedures, obtain the code number and deactivate the audio anti-theft function before disconnecting the battery.
Deactivate the airbag system as follows:
1.
Disconnect battery ground cable, then wait at least 20 seconds to begin work.
2.
Disconnect clock spring connectors (orange and blue, usually beneath steering column).
3.
Never use a back-up power source from outside vehicle.
4.
When storing airbag assembly, keep upper surface of airbag assembly facing upward.
5.
All airbag components are marked with warning stickers, always follow instructions printed on the stickers.
6.
When working around airbag sensors, it may be necessary to remove sensors to prevent any electrical shocks that may occur when work is being
performed.
7.
All wiring and connectors for the airbag system are encased in yellow, if any damage occurs to wiring or connectors.
8.
To arm airbag system, proceed as follows:
a. Turn ignition switch to the LOCK position.
b. Reconnect battery ground cable.
c. Wait at least 10 seconds before turning the ignition switch from the LOCK position.
