mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Tail Lamp > < Pop-up Headlamp Switch|Locations
Page 1
background image

Turn Signal Switch: Service and Repair

1.

Prior to disconnecting battery ground cable, deactivate audio system anti-theft, if equipped.

2.

Disarm airbag.

3.

Remove knee protector, then disconnect clock spring and combination switch electrical connectors.

4.

Remove attaching nuts and disconnect air bag module. Do not strike steering shaft with a hammer, the collapsible shaft may collapse.

5.

Remove steering wheel. 

6.

Loosen attaching screws and remove clock spring connector assembly with combination switch.

7.

Reverse procedure to install.

Tail Lamp > < Pop-up Headlamp Switch|Locations