MX-5 Miata L4-1597cc 1.6L DOHC (1992)
Impact Sensor: Testing and Inspection
D-Sensors
Fig. 19 D-sensor Resistance Test.
1.
Disconnect battery ground cable.
2.
Remove knee protector, then disconnect clock spring connectors (orange and blue).
3.
Disconnect D sensor connector.
4.
Measure resistance between terminals of sensor connectors, Fig. 19. Resistance should be approximately 1200 ohms. Do not connect ohmmeter
to harness side connector.
5.
If resistance is not as specified, replace sensor(s).
