MX-5 Miata L4-1597cc 1.6L DOHC (1992)
2. Remove the dust cover with a chisel.
Hub Bolt
Caution: Do not remove the hub bolts if not necessary. Do not reuse the removed hub bolts.
-
Press out the hub bolts.
INSTALLATION
Hub Bolt
-
Press in new hub bolts.
Dust cover
1. Mark the new dust cover as the removed one.
2. Align the marks of the new dust cover and the knuckle.
3. Install the new dust cover with the SST.
Wheel Bearing
-
Press the new wheel bearing into the knuckle with the SST.
Rear Wheel Hub Assembly