MX-5 Miata L4-1597cc 1.6L DOHC (1992)
Drive/Propeller Shaft: Service and Repair
Fig. 1 Driveshaft Removal
1.
Raise and support vehicle, then remove tire and wheel assembly.
2.
Remove driveshaft locknut, Fig. 1.
3.
Mark position of output shaft of differential and driveshaft for installation reference.
4.
Remove driveshaft to differential carrier output shaft attaching nuts, then the driveshaft from vehicle.
5.
Reverse procedure to install, align marks made during removal and tighten all bolts to specifications.