mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

M/T - 1st and 2nd Gear Grind|Page 3277 > < M/T - 1st and 2nd Gear Grind|Page 3271
Page 1
background image

Shifter M/T: All Technical Service Bulletins
M/T - 1st and 2nd Gear Grind

Bulletin No.: 005/93
Issued: 6/16/93
Revised

Category

J

Applicable Model/s
1990-93 MX-5

Subject:
1st and 2nd GEAR GRIND

APPLICABLE MODELS/VINS
MX-5 MODELS

1990 - Vehicles with a VIN of JM1NA351*L0100001 through JM1NA351*L099999
1991 - Vehicles with a VIN of JM1NA351*M0200001 through JM1NA351*M099999
1992 - Vehicles with a VIN of JM1NA351*N0300001 through JM1NA351*N099999
1993 - Vehicles with a VIN of JM1NA351*P0400001 through JM1NA351*P0413073

DESCRIPTION

A grinding noise may be heard and/or felt from inside the shift change lever when rapidly shifting from first to second gear. The noise may be caused by
the shift change lever.

The lever has been modified to correct this condition.

REPLACEMENT PROCEDURE

If grinding is felt and heard through the lever, replace it with a modified lever.

PARTS INFORMATION

NOTE:

The new and old part are completely interchangeable.

WARRANTY INFORMATION
(Applies to vehicles covered under warranty)

M/T - 1st and 2nd Gear Grind|Page 3277 > < M/T - 1st and 2nd Gear Grind|Page 3271