mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Washer Nozzle - Fluid Leakage|Page 5323 > < Washer Nozzle - Fluid Leakage|Page 5321
Page 2
background image

Removal Note:  Regulator handle
Remove the regulator handle clip with a rag, as shown.

Installation Note:  Regulator handle
Install the regulator handle as shown.

Note: With door glass at fully-closed position.

Adjustment

Door glass
Adjustment of the door glass (convertible top and detachable hard top) is made as follows:

1. Vertical adjustment of door glass

Adjustment procedure
Remove the weatherstrip, and check alignment with the door glass in the fully-closed position.
(1) Loosen upper stop installation bolts (A).
(2) Adjust by moving the upper stop up or down so that the upper edge of the door glass is in the correct position, and then tighten bolts (A).

Washer Nozzle - Fluid Leakage|Page 5323 > < Washer Nozzle - Fluid Leakage|Page 5321