MX-5 Miata L4-1597cc 1.6L DOHC (1992)
1.
Check the vehicle's VIN.
^
If the VIN is JM1NA355**R0521312 and lower, the check valve is already installed. Proceed to steps 3 - 8.
^
If the VIN is higher than JM1NA35**R0521312 but below JM1NA35**V0719634, replace joint pipe "A" with a check valve. Proceed to
steps 2 - 8.
2.
Install check valve at joint "A." refer to Fig. 3.
NOTE:
Install the check valve so that the check ball faces the pump. If the valve is installed in the wrong direction, the washer fluid will not flow from the
nozzle.
3.
Cut 560 mm from the service part (vinyl tube).
