mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Keyless Entry Module > < Antenna - Keyless Entry|Service and Repair|Page 5340
Page 3
background image

5. Disconnect the connector, then remove the keyless antenna.
6. Install in the reverse order of removal.

Interior, trunk

1. Disconnect the negative battery cable.
2. Remove the trunk side trim.
3. Remove the nuts.

4. Disconnect the connector, then remove the keyless antenna.
5. Install in the reverse order of removal.

Keyless Entry Module > < Antenna - Keyless Entry|Service and Repair|Page 5340