MX-5 Miata L4-2.0L (2008)
1. Pull the center panel unit outward, detach clip A from the dashboard, and then remove the center panel unit.
2. When removing the center panel unit, disconnect the audio unit connector (24-pin) first to aid in disconnecting other connectors and the antenna
plug.
Back Trim Removal/Installation
BACK TRIM REMOVAL/INSTALLATION
1. Remove the following parts:
1. Console
2. Quarter trim
3. Scuff plate
4. Tire house trim
5. Aeroboard
6. Front seat back bar garnish
2. Pull the open hook lever outward and remove it while pinching the tabs as shown in the figure. (except the power retractable hardtop)
3. Remove the fasteners.