MX-5 Miata L4-2.0L (2008)
Convertible Top Control Module: Service and Repair
Power Retractable Hardtop Control Module Bracket Removal/Installation
POWER RETRACTABLE HARDTOP CONTROL MODULE BRACKET REMOVAL/INSTALLATION
1. Remove the battery cover.
2. Disconnect the negative battery cable.
3. Remove the following parts:
1. Console
2. Quarter trim
3. Scuff plate
4. Tire house trim
5. Aeroboard
6. Front seat back bar garnish
7. Back trim
4. Remove the roof hook cable case.
5. Remove in the order indicated in the table.
6. Remove the nuts.
7. Remove the power retractable hardtop control module bracket.
8. Install in the reverse order of removal.
