mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Convertible Top Deck Lid Position Switch / Sensor > < Convertible Top Deck Lid Motor|Testing and Inspection
Page 1
background image

Convertible Top Deck Lid Motor: Service and Repair

DECK PANEL MOTOR REMOVAL/INSTALLATION

CAUTION:  If the deck panel does not operate electrically, see "DECK PANEL MANUAL OPEN/CLOSE PROCEDURE" to open/close the
deck panel.

1. Fully open the deck panel.
2. Remove the battery cover.
3. Disconnect the negative battery cable. 
4. Set the side shelf out of the way. 
5. Remove the deck panel. 

6. Remove the screws indicated in the figure.
7. Remove the deck panel motor.
8. Install in the reverse order of removal.

Convertible Top Deck Lid Position Switch / Sensor > < Convertible Top Deck Lid Motor|Testing and Inspection