MX-5 Miata L4-2.0L (2008)
Wheel Speed Sensor: Service and Repair
Rear
Antilock Brake System
REAR ABS WHEEL-SPEED SENSOR REMOVAL/INSTALLATION
1. Remove the trunk end trim.
2. Remove the partition board.
3. Remove the trunk side trim.
4. Remove the fuel-filler pipe protector.
5. Remove in the order indicated in the table.
6. Install in the reverse order of removal.
Dynamic Stability Control
REAR ABS WHEEL-SPEED SENSOR REMOVAL/INSTALLATION
1. Remove or install the rear ABS wheel-speed sensor in the same order of vehicles with ABS.
