MX-5 Miata L4-2.0L (2008)
Hazard Warning Flasher: Component Tests and General Diagnostics
FLASHER CONTROL MODULE INSPECTION
1. Remove the flasher control module with the connector still connected.
2. Measure the voltage at each terminal (other than terminal F).
-
If the voltage is not as specified in the Terminal Voltage Table (Reference), inspect the parts under "Inspection item (s)".
3. Disconnect the flasher control module connector.
4. Verify that continuity at terminal F is as indicated in the Terminal Voltage Table (Reference).
-
If there is any malfunction, inspect the parts under "Inspection item (s)".
-
If the system does not work properly even though the parts or related wiring harnesses do not have any malfunction, replace the flasher control
module.
