MX-5 Miata L4-2.0L (2008)
4. Remove the fasteners. (LH)
5. Slightly bent back the mudguard.
6. Remove the cover.
CAUTION: The bulb generates extremely high heat when it is illuminated. If the surface of the bulb is soiled, excessive heat will build up
and the life of the bulb will be shortened. When replacing the bulb, hold the metal flange, not the glass. Wipe off any finger prints before
installation.
7. Remove the connector, then remove the discharge headlight bulb.
8. Install in the reverse order of removal.
High-beam
1. Remove the battery cover.
2. Disconnect the negative battery cable.
3. Disconnect the connector.
CAUTION: A halogen bulb generates extremely high heat when it is illuminated. If the surface of the bulb is soiled, excessive heat will
build up and the life of the bulb will be shortened. When replacing the bulb, hold the metal flange, not the glass. Wipe off any finger
prints before installation.
4. Remove the socket, then remove the headlight bulb.
5. Install in the reverse order of removal.
