MX-5 Miata L4-2.0L (2008)
11. Align the mark of the manual shaft lever component as shown in the figure.
12. Install the manual shaft lever component installation nut.
Tightening torque
10.8 - 14.7 Nm (111 - 149 kgf-cm, 96.4 - 129.3 in-lbf)
13. Install the insulator.
Tightening torque
8 - 11 Nm (82 - 112 kgf-cm, 72 - 97 in-lbf)
14. Install the middle pipe.
15. Install the tunnel member component.
16. Connect the negative battery cable.
17. Install the battery cover.